- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电电压小交流电检验仪(耐电弧焊接检验仪)-(折算机保持)
High voltage low current tester (arc resistance tester) - (computer control)
设备品牌:耐电弧试验机
Product name: electric arc resistance tester
物品材质:NDH-A
Product model: NDH - A
充分满足标准:GB/T 1411-2002《混合物隔热食材耐高压得很低直流电压电孤自放电的经过多次实验发现》(共同IEC 61621-1997)及ASTM D495等原则的请求设计方案制做的,并非常符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
具体采用范围内及能力:
本冲击试验箱是确定软件于电机马达、电气和小型电气等业内的焊工用朔胶、光敏硅胶粘合剂胶和隔热漆等隔热材质的耐电弧焊接焊接特性指标划分,主用到固态垃圾隔热材质如:朔胶、溥膜、光敏硅胶粘合剂、矿石、瓷质、窗玻璃、隔热油、隔热漆、瓦楞纸等物质的耐电弧焊接焊接特性指标測試;
本疲劳压力试验机由折算机调节工作,还可以展现现如今實驗操作形态及實驗操作时期,實驗操作终止后并保存图片现如今實驗操作资料,并可复印.标准化研究报告范文。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 超声波焊接机为内外整体架构,顶部为操作步骤设计,顶部为冲击湿热试验箱。
2 本食品用*新智慧设定新技术,确认进行步骤(IEC或ASTM)可自动式完成校正,并在租赁上界面显示检测环节和导致。
3 **特点更好,抗干涉专业能力强,测量精确高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断的时间计算误差:需小于 ±10ms
2 调压器容积:2kVA
3 额定的检验线电压:12.5kV
4 检验相电压精确度:±3%
5 电流值有效控制准确度:±10% 感应电流检测的精准度:1.5%
6 参比电极对制样气压:(0.5±0.05)N
7 电极装修材料装修材料:钨棒
8 电级空距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 运用大工作环境温度表:(23±2)℃
10 选用生活环境含水率:(50±5)%
11 电源线:220V±5% 50Hz
12 实验室检测 最简单的方法: 国家标准/美标/10 mA 反复/20 mA 间断/30 mA连续性/40 mA间断性
13 疲劳试验方式以下:
| 步骤段 | 电孤电流大小 mA | 电弧放电通断时期s | 各程序流程图段不间断时期s | 实验室检测总时期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 间断通 | 60 | 240 | |
| 5 | 20 | 连续式通 | 60 | 300 | |
| 6 | 30 | 间断性通 | 60 | 360 | |
| 7 | 40 | 反复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序列号 | 公司名称 | 规模 | 微信备注名 |
| 01 | 耐弧光软件分析仪 | 1台 | |
| 02 | 工业机系统 | 一种 | |
| 03 | 电极材料橡胶支座 | 每套 | |
| 04 | 供电拖链电缆 | 一台 | |
| 05 | 与地面放** | 一批 | |
| 06 | 电压电流毫安表 | 一套 | |
| 07 | 我的电脑测控系统软件 | 套 | |
| 08 | 试板架 | 1支 | |
| 09 | 电级距离感标准的块 | 2块 | |
| 10 | 维度准则块 | 2块 | |
| 11 | 陶瓷图片片 | 2片 | |
| 12 | 喷墨直接彩喷机 | 1台 | 厂家 |
| 13 | 算起机 | 1台 | 项目 |
| 14 | 运用阐述书 | 1份 | |
| 15 | 合理证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 的产品具体型号:
NDH-A 耐电孤试验检测仪-微机管控
NDH-B 耐焊弧实验仪-触摸显示屏屏把控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!